In short: mold remediation in Tampa typically costs $10–$25 per affected square foot. That puts one contained area at about $1,200–$3,000, a full room at $2,500–$6,000, and whole-home work after a flood at $10,000–$30,000. Independent testing adds $450–$900. All figures are estimates.
Remediation prices by job
| Job | Estimated price | What drives it |
|---|---|---|
| One contained area (bathroom wall, closet, under a sink) | $1,200–$3,000 | Square footage, access |
| Per affected square foot | $10–$25 / sq ft | Depth into the structure |
| Full room or several wall cavities | $2,500–$6,000 | Walls and ceiling opened |
| Attic decking and framing | $2,000–$6,000 | Area and attic height |
| Crawl space framing and subfloor | $1,500–$4,500 | Clearance under the floor |
| Air handler, drain pan and nearby ducts | $2,500–$7,500 | Unit size, duct replaced |
| Whole home or post-flood | $10,000–$30,000 | Number of rooms and cavities |
Testing and drying prices
| Job | Estimated price | What drives it |
|---|---|---|
| Visual assessment by a licensed assessor | $300–$500 | Paid to the assessor |
| Assessment with lab samples | $450–$900 | Number of samples |
| Post-remediation clearance test | $300–$600 | Rooms being cleared |
| Water extraction and drying | $1,500–$5,000 | Days of equipment |
Every figure on this page is an estimate. They come from published Florida and national cost data and local contractor ranges, not a quote for your property. We price your job in writing after measuring it.

What moves the price on a Tampa job
- How far it has spread inside the wall. Visible spotting is often the edge of a larger patch. Cavities are opened until clean material is reached.
- Where it is. A wall in a spare bedroom is quick. An attic in August, a crawl space or an air handler closet takes longer and needs more protection.
- Containment size. Bigger enclosures need more negative-air machines and more setup time.
- What was wet. Clean supply water allows more drying in place; flood or sewer water means more comes out.
- Drying days. Dehumidifiers and air movers are billed by the day until readings match dry material.
- Contents. Moving, cleaning or bagging furniture and stored boxes adds labor.
Add-ons we list separately
- Rebuild: drywall, texture, paint, baseboard and flooring.
- Plumbing or roof repair to stop the source, by the right licensed trade.
- Contents cleaning or disposal.
- Antimicrobial sealer on framing where it is appropriate.
Why Tampa mold quotes disagree
Two quotes for the same stain can be thousands apart because they describe different jobs. A low number often means spraying and painting with no containment and no clearance. A high one may include rebuild the other left out. Ask each company to write down the square footage they will remove, how the area will be contained, whether drying is included, who does clearance testing, and whether drywall replacement is in the price. When those lines match, prices usually land close together.
Also watch for a company offering to test and then remediate the same property. In Florida that is a conflict the law is written to prevent, and the test tends to find exactly the size of job the tester wants to sell.
Price questions
How much does mold remediation cost in Tampa?
Most contained jobs work out at $10–$25 per affected square foot, as an estimate. One area such as a bathroom wall is commonly $1,200–$3,000, a full room $2,500–$6,000, and whole-home work after flooding $10,000–$30,000.
Why is testing billed separately?
Florida keeps assessment and remediation apart on the same property, so lab testing and clearance are done, and invoiced, by an independent licensed assessor.
Is rebuild included in a remediation price?
Usually not. Remediation ends when the area is clean, dry and cleared. New drywall, paint and flooring are priced as a separate line so you can compare them.
Will insurance pay any of this?
When the mold follows a sudden, covered water event, often yes, up to the mold limit in your policy, which in Florida is frequently a fixed dollar cap. Long-term leaks are commonly excluded.
Last reviewed October 8, 2026.
